From 60 Seconds to 6: How ONAIL 1 is Ushering in the 4.0 Era of Nail Lamps ?

Updated on
From 60 Seconds to 6: How ONAIL 1 is Ushering in the 4.0 Era of Nail Lamps ?

Next-Generation Chip System × Cool-Cure™ Low-Heat Curing × AI-Powered Nail Recognition

In October 2026, ONAIL achieved a new breakthrough in nail lamp technology: reducing curing time from the 60 seconds commonly associated with traditional LED nail lamps to just 6 seconds. By combining this speed with AI-powered nail recognition and Cool-Cure™ low-heat curing technology, ONAIL is redefining what nail technicians can expect from curing efficiency and the overall salon experience.

To understand this breakthrough, let’s first look at how nail lamp technology has evolved.

ONAIL next-generation AI nail lamp technology

From 180s to 6s: How Has Nail Lamp Technology Evolved?

The evolution of nail lamps is about more than changing the light source. It is also a story of continuous improvements in curing efficiency, control, and user experience.

This development can be divided into four stages:

Technology Generation Timeline Key Technology Typical Curing Time Light Direction and Control
1.0: UV Tube Lamps Before 2013 Traditional UV tubes As fast as approximately 180 seconds Primarily illuminates the entire hand area
2.0: LED Lamps July 2013 LED-based nail lamps introduced 60 seconds Primarily illuminates the entire hand area
3.0: AI LED Lamps December 2024 LED light source + AI recognition 60 seconds Targets the nails rather than the skin
4.0: 6-Second AI LED Lamps October 2026 Next-generation chip + Cool-Cure™ 6-second AI nail lamp 6 seconds Targets the nails rather than the skin
Evolution of ONAIL nail lamp technology

It is worth noting that the technological innovations behind generations 2.0, 3.0, and 4.0 were all pioneered by ONAIL.

Generation 2.0: ONAIL’s parent company developed the world’s first LED-based nail lamp, establishing the technological foundation for the LED nail lamps widely used today. This innovation reduced curing time from 180 seconds to 60 seconds.

Generation 3.0: ONAIL developed the world’s first AI LED nail lamp, precisely targeting the nail surface and avoiding direct light exposure to the surrounding skin, addressing a key concern associated with nail lamp use.

Generation 4.0: In October 2026, ONAIL launched the world’s first 6-second AI nail lamp. It retained the ability to target the nails rather than the skin while reducing curing time from 60 seconds to just 6 seconds.

From 180 seconds to 60, and now to 6, each technological leap has involved more than simply reducing a number. It has required a new approach to light sources, control systems, and the curing process itself.

Leave a comment

Please note, comments need to be approved before they are published.